{"product_id":"corm-propagation-station-holds-up-to-18674","title":"Corm Propagation Station","description":"\u003cp\u003eA compact, organized propagation setup for Alocasia corms and other small plant propagations.\u003cbr\u003eEach station includes one stand with three removable propagation trays. Every tray contains a removable riser that holds up to 16 corms, providing space for up to 48 corms per station.\u003c\/p\u003e\n\u003cp\u003eThe trays can be removed from the stand and used independently. Connect two or more stands to create a stable, tiered propagation station with additional growing space.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003cbr\u003e• Three removable propagation trays per station\u003cbr\u003e• Each riser holds up to 16 corms\u003cbr\u003e• Total capacity of up to 48 corms per station\u003cbr\u003e• Mixed riser opening sizes accommodate different corm sizes\u003cbr\u003e• Built-in handle makes each riser easy to lift out\u003cbr\u003e• Adjustable lids let you control ventilation - open, partially open or close the vents as needed\u003cbr\u003e• Removable trays can be used independently\u003cbr\u003e• Available in three stand heights\u003cbr\u003e• Connect multiple stands for added stability and a tiered setup\u003cbr\u003e• Stand, trays and risers can be ordered in different colors\u003c\/p\u003e\n\u003cp\u003eRiser openings - each riser contains 16 openings in three sizes:\u003cbr\u003e• 3 openings: Ø6 mm (0.24 in)\u003cbr\u003e• 10 openings: Ø7 mm (0.28 in)\u003cbr\u003e• 3 openings: Ø10 mm (0.39 in)\u003c\/p\u003e\n\u003cp\u003eThe different opening sizes accommodate corms at various stages of growth. Capacity may be lower when using unusually large corms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003eStand:\u003cbr\u003e• Width: 18.5 cm (7.28 in)\u003cbr\u003e• Depth: 6.5 cm (2.56 in)\u003cbr\u003e• Choice of height: 10 cm (3.94 in), 12.5 cm (4.92 in), 15 cm (5.91 in)\u003c\/p\u003e\n\u003cp\u003eEach tray:\u003cbr\u003e• Diameter: 5 cm (1.97 in)\u003cbr\u003e• Height: 4 cm (1.57 in)\u003cbr\u003e• Adjustable ventilation\u003c\/p\u003e\n\u003cp\u003eRotate the lid to leave the ventilation holes open, partially open or closed. This allows you to adjust airflow and humidity as the corms develop, helping reduce excess condensation and the risk of rot.\u003c\/p\u003e\n\u003cp\u003eRegularly check the corms and adjust ventilation according to the moisture level inside each tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials and grow lights\u003c\/strong\u003e\u003cbr\u003e• Stand: PLA plastic\u003cbr\u003e• Trays, lids and risers: translucent PETG plastic\u003c\/p\u003e\n\u003cp\u003eThe translucent PETG components are suitable for use beneath low-heat LED grow lights. As a general starting point, keep the light at least 10 cm (4 in) above the tray lids. Stronger lights may require more distance, so always follow the light manufacturer’s recommendations. If the trays feel warm, increase the distance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant\u003c\/strong\u003e: The PLA stand is not suitable for use on heat mats, heat beds or other heated surfaces. Excessive heat may cause deformation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is included\u003c\/strong\u003e\u003cbr\u003e• One stand in your selected height\u003cbr\u003e• Three removable propagation trays\u003cbr\u003e• Three removable risers\u003cbr\u003e• Three adjustable ventilation lids\u003c\/p\u003e\n\u003cp\u003eCorms, growing medium, grow lights, heat mats and other decorations are not included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAssembly and care\u003c\/strong\u003e\u003cbr\u003eThe stand arrives in separate pieces and requires simple assembly. Gently connect the parts without forcing them.\u003c\/p\u003e\n\u003cp\u003eClean with lukewarm water and mild soap. Do not place the components in a dishwasher and do not expose them to high temperatures.\u003c\/p\u003e\n\u003cp\u003eSmall layer lines and minor surface variations are natural characteristics of the 3D-printing process.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"noordinaryleaf","offers":[{"title":"10 cm (3.94 in)","offer_id":54871731798355,"sku":"ETS_CPS10","price":25.0,"currency_code":"EUR","in_stock":true},{"title":"12.5 cm (4.92 in)","offer_id":54871732453715,"sku":"ETS_CPS12","price":28.0,"currency_code":"EUR","in_stock":true},{"title":"15 cm (5.91 in)","offer_id":54871733109075,"sku":"ETS_CPS15","price":31.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/8910\/8051\/files\/il_fullxfull.8460356781_183z.jpg?v=1788689409","url":"https:\/\/www.noordinaryleaf.com\/products\/corm-propagation-station-holds-up-to-18674","provider":"noordinaryleaf","version":"1.0","type":"link"}